HP (Hewlett-Packard) 2650 (J4899A/B) ユーザーズマニュアル

8-43

Displaying 802.1X Configuration, Statistics, and Counters

Show Commands for Port-Access Supplicant

For each port configured as a supplicant, 

show port-access supplicant statistics [e] < port-list >] displays the source MAC 
address and statistics for transactions with the authenticator device most 
recently detected on the port. If the link between the supplicant port and the 
authenticator device fails, the supplicant port continues to show data received 
from the connection to the most recent authenticator device until one of the 
following occurs:

■

The supplicant port detects a different authenticator device.

■

You use the 

aaa port-access supplicant [e] < port-list > clear-statistics 

command to clear the statistics for the supplicant port.

■

The switch reboots.

Thus, if the supplicant’s link to the authenticator fails, the supplicant retains 
the transaction statistics it most recently received until one of the above 
events occurs. Also, if you move a link with an authenticator from one 

show port-access supplicant [[e] < port-list >] [statistics]

show port-access supplicant [[e] < port-list >]

 secret parameter) for all ports or < port-

list > ports configured on the switch as supplicants. The 
Supplicant State can include the following:
Connecting - Starting authentication.
Authenticated - Authentication completed (regardless
   of whether the attempt was successful)

.

Acquired - The port received a request for 
   identification from an authenticator.
Authenticating - Authentication is in progress.
Held - Authenticator sent notice of failure. The 
   supplicant port is waiting for the authenticator’s
   held-period (page 8-36).

For descriptions of the supplicant parameters, refer to 
“Configuring a Supplicant Switch Port” on page 8-36. 

show port-access supplicant [[e] < port-list >] statistics

< port-list > ports configured