HP (Hewlett-Packard) 2650 (J4899A/B) ユーザーズマニュアル

9-37

Operating Notes for Port Security

a.

Click on the 

Security tab.

b.

Click on

. “Ports with Intrusion Flag” indicates any ports 

for which the alert flag has not been cleared.

c.

To clear the current alert flags, click on

.

To access the web-based Help provided for the switch, click on 

 in the web 

browser screen.

Operating Notes for Port Security

The Intrusion Log lists 

detected intruders by MAC address. Proxy Web Servers

If you are using the switch’s web browser interface through a switch port 
configured for Static port security, and your browser access is through a proxy 
web server, then it is necessary to do the following:

■

Enter your PC or workstation MAC address in the port’s Authorized 
Addresses list.

■

Enter your PC or workstation’s IP address in the switch’s IP Autho-
rized Managers list. See chapter 11, “Using Authorized IP Managers”.)

Without both of the above configured, the switch detects only the proxy 
server’s MAC address, and not your PC or workstation MAC address, and 
interprets your connection as unauthorized.

If you reset the switch (using the 

Reset button, Device Reset, or Reboot Switch), the Intrusion Log will list the 
time of all currently logged intrusions as “prior to” the time of the reset. 

If the 

Intrusion Log is full of entries for which the alert flags have not been reset, a 
new intrusion will cause the oldest entry to drop off the list, but will not change 
the alert flag status for the port referenced in the dropped entry. This means 
that, even if an entry is forced off of the Intrusion Log, no new intrusions can 
be logged on the port referenced in that entry until you reset the alert flags.