HP (Hewlett-Packard) JG221A ユーザーズマニュアル

To do… 

Use the command… 

Remarks 

Return to the parent view from the 
current view 

quit 

Required 
Available in any view. 

 

 

NOTE: 
• 

The quit command in user view stops the current connection between the terminal and the device. 

• 

In public key code view, use the public-key-code end command to return to the parent view (public key
view). In public key view, use the peer-public-key end command to return to system view. 

 

Returning to user view 

This feature allows you to return to user view from any other view, without using the quit command 

repeatedly. You can also press Ctrl+Z to return to user view from the current view. 
Follow the step below to exit to user view: 

To do… 

Use the command… 

Remarks 

Return to user view 

return 

Required 
Available in any view except user 
view 

 

Using the CLI online help 

Type a question mark (?) to obtain online help. See the following examples. 

1. 

Type ? in any view to display all commands available in this view as well as brief descriptions of 
the commands. For example: 

<sysname> ? 

User view commands: 

  archive           Specify archive settings 

  backup            Backup next startup-configuration file to TFTP server 

  boot-loader       Set boot loader 

  bootrom           Update/read/backup/restore bootrom 

  cd                Change current directory 

…Omitted… 

2. 

Type part of a command and a ? separated by a space.  

If ? is at the keyword position, the CLI displays all possible keywords with a brief description for each 

keyword. For example: 

<sysname> terminal ? 

  debugging  Send debug information to terminal 

  logging    Send log information to terminal 

  monitor    Send information output to current terminal 

  trapping   Send trap information to terminal 

If ? is at the argument position, the CLI displays a description about this argument. For example: 

<sysname> system-view 

[sysname] interface vlan-interface ? 

4