HP (Hewlett-Packard) JG221A ユーザーズマニュアル
Object Requirements
Configure the IP address of the VLAN interface, and make sure the SSH server
and client can reach each other.
and client can reach each other.
SSH server
Configure the authentication mode and other settings.
Run the SSH client program.
SSH client
Obtain the IP address of the VLAN interface on the server.
By default, the device is enabled with the SSH server and client functions.
•
On a device that serves as the SSH client, you can log in to an SSH server to perform operations on
the server.
the server.
•
On a device that serves as the SSH server, you can configure the authentication mode and user level
for SSH users. By default, password authentication is adopted for SSH login, but no login password
for SSH users. By default, password authentication is adopted for SSH login, but no login password
is configured, so you cannot log in to the device through SSH by default. Before you can log in to
the device through SSH, you need to log in to the device through the console port and configure the
authentication mode, user level, and common settings.
authentication mode, user level, and common settings.
This section includes these topics:
•
•
Configuring the SSH server
Configuration prerequisites
You have logged in to the device, and want to log in to the device through SSH in the future.
By default, you can log in to the device through the console port without authentication and have user
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see “
see “
.”
Configuration procedure
Follow these steps to configure the device that serves as an SSH server:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create local key pair(s)
public-key local create { dsa | rsa }
Required
By default, no local key pair(s) are
By default, no local key pair(s) are
created.
Enable SSH server
ssh server enable
Required
By default, SSH server is disabled.
By default, SSH server is disabled.
Enter one or more VTY user
interface views
interface views
user-interface vty first-number
[ last-number ]
[ last-number ]
—
Specify the scheme authentication
mode
mode
authentication-mode scheme
Required
By default, authentication mode for
By default, authentication mode for
VTY user interfaces is password.
48