HP (Hewlett-Packard) JG221A ユーザーズマニュアル

Step6

Character string CONNECT9600 is displayed on the terminal. Then a prompt appears when you press

Enter.

Figure 23 Configuration page

Step7

If the authentication mode is password, a prompt (for example, HP) appears when you type the

configured password on the remote terminal. Then you can configure or manage the router. To get help,

type ?.

Step8

Execute commands to configure the device or check the running status of the device. To get help, type ?.

NOTE:
•

To terminate the connection between the PC and device, execute the ATH command on the terminal to
terminate the connection between the PC and modem. If you cannot execute the command on the
terminal, input AT+ + + and then press Enter. When you are prompted OK, execute the ATH command,

and the connection is terminated if OK is displayed. You can also terminal the connection between the

PC and device by clicking

on the hyper terminal window.

•

Do not close the hyper terminal directly. Otherwise, the remote modem may always be online, and you
will fail to dial in the next time.

Modem login authentication modes

The following authentication modes are available for modem dial-in login: none, password, and
scheme.

•

none—Requires no username and password at the next login through modems. This mode is insecure.

•

password—Requires password authentication at the next login through the console port. Keep your

password.

•

scheme—Requires username and password authentication at the next login through the console port.

Authentication falls into local authentication and remote authentication. To use local authentication,
configure a local user and related parameters. To use remote authentication, configure the username