HP (Hewlett-Packard) JG221A ユーザーズマニュアル
Figure 26 Configuration page
Configuring common settings for modem login (optional)
Follow these steps to configure common settings for modem login:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable display of copyright
information
information
copyright-info enable
Optional
Enabled by default.
Enabled by default.
Enter one or more AUX user
interface views
interface views
user-interface aux first-number
[ last-number ]
[ last-number ]
—
Configure the
baud rate
baud rate
speed speed-value
Optional
By default ,the baud rate is 9600
bps.
Transmission rate is the number of
bits that the device transmits to the
By default ,the baud rate is 9600
bps.
Transmission rate is the number of
bits that the device transmits to the
terminal per second.
Configure the
parity check mode parity { even | none | odd }
parity check mode parity { even | none | odd }
Optional
By default, the parity check mode is
none, which means no check bit.
By default, the parity check mode is
none, which means no check bit.
Configure
AUX user
AUX user
interface
properties
Configure the stop
bits
bits
stopbits { 1 | 1.5 | 2 }
Optional
By default, the stop bits of the
By default, the stop bits of the
console port is 1.
Stop bits are the last bits transmitted
in data transmission to
Stop bits are the last bits transmitted
in data transmission to
unequivocally indicate the end of a
character. The more the bits are, the
slower the transmission is.
62