HP (Hewlett-Packard) JG221A ユーザーズマニュアル

To do…

Use the command…

Remarks

Add a user to the SNMP group

snmp-agent usm-user v3 user-name
group-name [ [ cipher ]
authentication-mode { md5 | sha }

auth-password [ privacy-mode

{ 3des | aes128 | des56 }

priv-password ] ] [ acl acl-number ]

Required
If the cipher keyword is specified, both

auth-password and priv-password are

cipher text passwords.

Follow these steps to configure SNMPv1 and SNMPv2c settings:

To do…

Use the command…

Remarks

Enter system view

system-view

—

Enable SNMP agent

snmp-agent

Optional
Disabled by default.
You can enable SNMP agent
with this command or any

command that begins with

snmp-agent.

Create or update MIB view information

snmp-agent mib-view
{ excluded | included }

view-name oid-tree [ mask
mask-value ]

Optional
By default, the MIB view
name is ViewDefault and

OID is 1.

Directly

Configure an
SNMP

community

snmp-agent community
{ read | write }

community-name [ acl
acl-number | mib-view

view-name ]*

Configure an
SNMP group

snmp-agent group { v1 |
v2c } group-name

[ read-view read-view ]

[ write-view write-view ]

[ notify-view notify-view ]
[ acl acl-number ]

Configure
SNMP NMS

access right

Indirectly

Add a user to the
SNMP group

snmp-agent usm-user { v1 |
v2c } user-name group-name

[ acl acl-number ]

Required
Use either approach.
The direction configuration
approach is for SNMPv1 or

SNMPv2c. The community

name configured on the
NMS should be consistent

with the username configured

on the agent.
The indirect configuration

approach is for SNMPv3.

NOTE:

The device supports the following SNMP versions: SNMPv1, SNMPv2c and SNMPv3. For more
information about SNMP, see the

Network Management and Monitoring Configuration Guide

NMS login example

In this example, iMC is used as the NMS.

Configuration on the device

# Assign IP address of device. Make sure the device and the NMS can reach each other. (Configuration
steps are omitted.)