HP (Hewlett-Packard) 331404-008 ユーザーズマニュアル
Configuration Menu 106
Table 100
HTTPS Access Configuration menu options
Command Description
certSave
Allows the client, or the Web browser, to accept the certificate and save the certificate to
Flash to be used when the switch is rebooted.
Flash to be used when the switch is rebooted.
cur
Displays the current SSL Web Access configuration.
Port configuration
Command:
/cfg/port <port number>
[Port 1 Menu]
gig - Gig Phy Menu
fiber - Fiber Link Menu
aclqos - Acl/Qos Configuration Menu
8021ppri - Set default 802.1p priority
pvid - Set default port VLAN id
name - Set port name
rmon - Enable/Disable RMON for port
tag - Enable/disable VLAN tagging for port
tagpvid - Enable/disable tagging on pvid
brate - Set BroadCast Threshold
mrate - Set MultiCast Threshold
drate - Set Dest. Lookup Fail Threshold
ena - Enable port
dis - Disable port
cur - Display current port configuration
gig - Gig Phy Menu
fiber - Fiber Link Menu
aclqos - Acl/Qos Configuration Menu
8021ppri - Set default 802.1p priority
pvid - Set default port VLAN id
name - Set port name
rmon - Enable/Disable RMON for port
tag - Enable/disable VLAN tagging for port
tagpvid - Enable/disable tagging on pvid
brate - Set BroadCast Threshold
mrate - Set MultiCast Threshold
drate - Set Dest. Lookup Fail Threshold
ena - Enable port
dis - Disable port
cur - Display current port configuration
This menu enables you to configure settings for individual GbE2 Interconnect Switch ports. This command is enabled
by default.
The following table describes the Port Configuration Menu options.
The following table describes the Port Configuration Menu options.
Table 101
Port Configuration Menu options
Command Description
gig
Displays the Gigabit Ethernet Physical Link Menu.
fiber
Displays the Fiber Link Menu.
aclqos
Displays the ACL Quality of Service Menu.
8021ppri
Configures the port’s 802.1p priority level.
pvid <1-4095>
Sets the default VLAN number which will be used to forward frames
which are not VLAN tagged. The default number is 1.
which are not VLAN tagged. The default number is 1.
NOTE:
VLAN 4095 is reserved for switch management.
name <1-64 characters>|none
Sets a name for the port (maximum 64 characters). The assigned port
name displays next to the port number on some information and statistics
screens.
name displays next to the port number on some information and statistics
screens.
rmon disable|enable
Enables or disables Remote Monitoring for the port. RMON must be
enabled for any RMON configurations to function.
enabled for any RMON configurations to function.
tag disable|enable
Disables or enables VLAN tagging for this port. It is disabled by default.
tagpvid disable|enable
Disables or enables VLAN tag persistence. When disabled, the VLAN tag
is removed from packets whose VLAN tag matches the port PVID. The
default value is
is removed from packets whose VLAN tag matches the port PVID. The
default value is
enabled
.
brate <0-262143>|dis
Limits the number of broadcast packets per second to the specified value.
If disabled (
If disabled (
dis
), the port forwards all broadcast packets.
mrate <0-262143>|dis
Limits the number of multicast packets per second to the specified value. If
disabled (
disabled (
dis
), the port forwards all multicast packets.
drate <0-262143>|dis
Limits the number of unknown unicast packets per second to the specified
value. If disabled (
value. If disabled (
dis
), the port forwards all unknown unicast packets.
ena
Enables the port.