HP (Hewlett-Packard) 331404-008 ユーザーズマニュアル

 

Configuration Menu  132  

 
 

Routing Information Protocol configuration  

Command:   

/cfg/l3/rip

 

[Routing Information Protocol Menu] 
     if       - RIP Interface Menu 
     update   - Set update period in seconds 
     redist   - RIP Route Redistribute Menu 
     on       - Globally turn RIP ON 
     off      - Globally turn RIP OFF 
     current  - Display current RIP configuration 

 

The RIP Menu is used for configuring Routing Information Protocol parameters. This option is turned off by default.  
The following table describes the RIP Configuration Menu options.  

Table 144 

 RIP Configuration Menu options

 

Command Description 

if <1-255> 

Displays the RIP Interface menu.  

update <1-120> 

Configures the time interval for sending for RIP table updates, in seconds.  
The default value is 30 seconds.  

redist 

Displays the RIP Route Redistribute menu.  

on 

Globally turns RIP on. 

off 

Globally turns RIP off. 

cur 

Displays the current RIP configuration. 

 

RIP Interface configuration  

Command:   

/cfg/l3/rip/if <1-255>

 

[RIP Interface 1 Menu] 
     version  - Set RIP version 
     supply   - Enable/disable supplying route updates 
     listen   - Enable/disable listening to route updates 
     poison   - Enable/disable poisoned reverse 
     split    - Enable/disable split horizon 
     trigg    - Enable/disable triggered updates 
     mcast    - Enable/disable multicast updates 
     default  - Set default route action 
     metric   - Set metric 
     auth     - Set authentication type 
     key      - Set authentication key 
     enable   - Enable interface 
     disable  - Disable interface 
     current  - Display current RIP interface configuration 

 

The RIP Menu is used for configuring Routing Information Protocol parameters. This option is turned off by default.  

 

NOTE:  

Do not configure RIP1 parameters if your routing equipment uses RIP version 2.  

 

The following table describes the RIP Interface Configuration Menu options.  

Table 145 

 RIP Interface Configuration Menu options

 

Command Description 

version 1|2|both 

Configures the RIP version used by this interface.  
The default value is version 

2

. 

 

supply disable|enable 

When enabled, the switch supplies routes to other routers. This command is 
enabled by default. 

 

listen disable|enable 

When enabled, the switch learns routes from other routers. This command is 
enabled by default.

 

poison disable|enable 

When enabled, the switch uses split horizon with poisoned reverse. When 
disabled, the switch uses only split horizon. The default value is 

disabled

.