HP (Hewlett-Packard) 331404-008 ユーザーズマニュアル
Configuration Menu 153
ACL Packet Format configuration
Command:
/cfg/acl/acl <1-4096>/pktfmt
[Filtering Packet Format Menu]
ethfmt - Set to filter on ethernet format
tagfmt - Set to filter on ethernet tagging format
reset - Reset all fields
cur - Display current parameters
ethfmt - Set to filter on ethernet format
tagfmt - Set to filter on ethernet tagging format
reset - Reset all fields
cur - Display current parameters
The following table describes the Packet Format Configuration Menu options.
Table 177
Packet Format Configuration Menu options
Command Description
ethfmt none/ethII/802.3
Defines the Ethernet format for the ACL.
tagfmt none|tagged
Defines the tagging format for the ACL.
reset
Resets Packet Format parameters for the ACL to their default values.
cur
Displays the current Packet Format parameters for the ACL.
ACL Block configuration
Command:
/cfg/acl/block <1-4096>
[ACL Block 1 Menu]
addacl - Add ACL item to block
remacl - Remove ACL item from block
cur - Display current ACL items in block
addacl - Add ACL item to block
remacl - Remove ACL item from block
cur - Display current ACL items in block
This menu allows you to compile one or more ACLs into an ACL Block. Each ACL in the ACL Block must fall within the
same mask.
The following table describes the ACL Block Configuration Menu options.
The following table describes the ACL Block Configuration Menu options.
Table 178
ACL Block Configuration Menu options
Command Description
addac1 <1-4096>
Adds the selected ACL to the ACL Block.
remacl <1-4096>
Removes the selected ACL from the ACL Block.
cur
Displays the current ACL block parameters.
ACL Group configuration
Command:
/cfg/acl/group <1-4096>
[ACL Group 1 Menu]
add - Add ACL or ACL block to group
rem - Remove ACL or ACL block from group
cur - Display current ACL items in group
add - Add ACL or ACL block to group
rem - Remove ACL or ACL block from group
cur - Display current ACL items in group
This menu allows you to compile one or more ACLs and ACL Blocks into an ACL Group. Once you create an ACL
Group, you can assign the ACL Group to one or more ports.
The following table describes the ACL Group Configuration Menu options.
The following table describes the ACL Group Configuration Menu options.
Table 179
ACL Group Configuration Menu options
Command Description
add acl|blk <1-4096>
Adds the selected ACL or ACL Block to the ACL Group.
rem acl|blk <1-4096>
Removes the selected ACL or ACL Block from the ACL Group.
cur
Displays the current ACL group parameters.