HP (Hewlett-Packard) 331404-008 ユーザーズマニュアル
Configuration Menu 98
User Security Model configuration
Command:
/cfg/sys/ssnmp/snmpv3/usm
[SNMPv3 usmUser 1 Menu]
name - Set USM user name
auth - Set authentication protocol
authpw - Set authentication password
priv - Set privacy protocol
privpw - Set privacy password
del - Delete usmUser entry
cur - Display current usmUser configuration
name - Set USM user name
auth - Set authentication protocol
authpw - Set authentication password
priv - Set privacy protocol
privpw - Set privacy password
del - Delete usmUser entry
cur - Display current usmUser configuration
You can make use of a defined set of user identities using this Security Model. An SNMP engine must have the
knowledge of applicable attributes of a user.
This menu helps you create a user security model entry for an authorized user. You need to provide a security name
This menu helps you create a user security model entry for an authorized user. You need to provide a security name
to create the USM entry.
The following table describes the User Security Model Configuration Menu options.
The following table describes the User Security Model Configuration Menu options.
Table 88
User Security Model Configuration Menu options
Command Description
name <1-32
characters>
Configures a string up to 32 characters long that represents the name of the user. This is the
login name that you need in order to access the switch.
login name that you need in order to access the switch.
auth md5|sha|none
Configures the authentication protocol between HMAC-MD5-96 or HMAC-SHA-96. The
default algorithm is
default algorithm is
none
.
authpw
Configures your password for authentication. If you selected an authentication algorithm using
the above command, you need to provide a password; otherwise you will get an error
message during validation.
the above command, you need to provide a password; otherwise you will get an error
message during validation.
priv des|none
Configures the type of privacy protocol on the switch. The privacy protocol protects messages
from disclosure. The options are
from disclosure. The options are
des
(CBC-DES Symmetric Encryption Protocol) or
none
. If
you specify
des
as the privacy protocol, then be sure that you have selected one of the
authentication protocols (MD5 or HMAC-SHA-96). If you select
none
as the authentication
protocol, you will get an error message.
privpw
This command allows you to create or change the privacy password.
del
Deletes the USM user entries.
cur
Displays the USM user entries.
SNMPv3 View configuration
Command:
/cfg/sys/ssnmp/snmpv3/view
[SNMPv3 vacmViewTreeFamily 1 Menu]
name - Set view name
tree - Set MIB subtree(OID) which defines a family of view subtrees
mask - Set view mask
type - Set view type
del - Delete vacmViewTreeFamily entry
cur - Display current vacmViewTreeFamily configuration
name - Set view name
tree - Set MIB subtree(OID) which defines a family of view subtrees
mask - Set view mask
type - Set view type
del - Delete vacmViewTreeFamily entry
cur - Display current vacmViewTreeFamily configuration