Black Box LPB2826A ユーザーズマニュアル

724-746-5500 | blackbox.com

Page 51

Chapter 3: Configuration

LPB2810A

• Rate Limiter ID: Select which rate limiter to apply on this port. The permitted values are “Disabled“ or the values 1 through

16. The default value is “Disabled“.

• Port Copy: Select which port frames are copied on. The values permitted are “Disabled“ or a specific port number. The default

value is “Disabled.“

• Mirror: Specify the mirror operation of this port. The permitted values are:

- Enabled: Frames received on the port are mirrored.

- Disabled: Frames received on the port are not mirrored.

The default value is “Disabled“.

• Logging: Specify the logging operation of this port. The permitted values are:

- Enabled: Frames received on the port are stored in the System Log.

- Disabled: Frames received on the port are not logged.

The default value is “Disabled“. Please note that the System Log memory size and logging rate are limited.

• Shutdown: Specify the port shutdown operation of this port. The permitted values are:

- Enabled: If a frame is received on the port, the port will be disabled.

- Disabled: Port shutdown is disabled.

The default value is “Disabled“.

• Counter: Counts the number of frames that match this ACE.

• Buttons:

- Save: Click to save changes.

- Reset: Click to undo any changes made locally and revert to previously saved values.

• Icons, upper right of screen (Refresh, clear): Click to refresh the ACL Ports Configuration or to clear them manually.