Pioneer k DVD-RW 16x4 int ATAPI 10pk bulk black DVR-108BK?10PK ユーザーズマニュアル

 

The Block bit is supported. 

When a CD medium is inserted in the drive, or no medium is inserted in the drive, the Length of Buffer field in the READ BUFFER 
CAPACITY data is set to 131800h. When a DVD medium is inserted in the drive, the Length of Buffer field in the READ BUFFER 
CAPACITY data is set to 188000h. 

If a WRITE command whose Transfer Length exceeds the Blank Length of Buffer value divided by 800h (or Available Buffer value), 
the drive terminates the WRITE command with the Check Condition status, and  set  the SK/ASC/ASCQ values to NOT 
READY/LONG WRITE IN PROGRESS (2/04/08) 

The RelAdr bit is not supported and must set to 0.   

If empty disc is mounted, the Logical Block Address field in the Read Capacity Data is set to zero. 

If a non-blank +RW disc is mounted, the Logical Block Address field in the Read Capacity Data is set to 23053Fh. 

If a disc which is not a +RW and has no Complete Session is mounted, Logical Block Address field in the Read Capacity Data is set to 
zero. 

When a CD-R/RW disc is mounted, if it is recorded by Track-at-once, the Logical Block Address field in the Read Capacity Data is 
set to the LBA immediately behind of the outermost Lead-out, so 2 Run-out blocks will be encountered. 

For +R media, the Last Session Lead-in Start Address is the LBA of where the next Intro shall be recoded. If no session exists on the 
disc, then the value returned is  00000000h. If the disc has complete status, then the value returned is FFFFFFFFh. 

For +R media, the Last Possible Lead-out Start Address is the LBA found in the ADIP of the disc’s lead-in. If the disc has complete 
status, then the value returned is FFFFFFFFh. 

The OPC table is not supported for  +R/+RW media. 

Following Format codes are supported. 

Format 

Code 

Returned Data 

Description 

00h 

Physical 

Returns information in the DVD Lead-in area 

01h 

Copyright  

Returns the Copyright information from DVD Lead-in 

02h 

Disc Key 

Returns the Disc Key obfuscated by using a Bus Key on the DVD -ROM media 

03h 

BCA 

Returns the BCA/NBCA information on DVD media 

04h 

Manufacturer’s 

Returns the Disc Manufacturing information from DVD Lead-in 

05h 

CGMS, CPM  

Returns CGMS, CPM information from specified sector 

06h 

Media Identifier 

Returns Media Identifier protected by using Bus Key  

07h 

Media Key Block 

Returns M edia Key Block protected by using Bus Key 

0Ch 

RMD in last Border-out  

Returns the Field of RMD in last Border-out of the DVD-R/-RW disc 

0Dh 

RMD 

Returns RMD sectors which recorded in RMA of the DVD-R/-RW disc 

0Eh 

Pre-recorded information 

Returns Pre-recorded information in Lead-in of the DVD -R/-RW disc 

0Fh 

Unique Disc Identifier 

Returns Unique Disc Identifier of the DVD-R/-RW disc 

10h 

Physical in the Lead-in 

Returns Physical format information of Control Data zone in the Lead-in 

20h 

Layer boundary 

information 

Returns DVD+R Double Layer Recording information 

30h 

Disc Control Blocks 

Returns the Disc Control Block identified by the Content Descriptor 

C0h 

Write Protection 

Return the Write Protection Status 

FFh 

Structure List 

Returns a list of DVD structure present in the specified Layer