Pioneer k DVD-RW 16x4 int ATAPI 10pk bulk black DVR-108BK?10PK ユーザーズマニュアル
製品コード
DVR-108BK?10PK
R8 Series Drive Command Reference Manual
Version 0.90
Page 44
4.30 WRITE (10), WRITE (12) Command
The RelAdr bit is not supported and must be set to zero.
If the Streaming bit in the CDB of the WRITE (12) command is set to one, the FUA bit shall be set to zero. The setting of the
Streaming bit is no effect on the operation.
Streaming bit is no effect on the operation.
When a formatted CD-RW disc or a formatted DVD-RW disc or a +RW disc is mounted, if the WRITE (10), WRITE (12) Command
that cause the writing buffer over run condition is received, the execution of these commands is deferred until the blank area of the
buffer grows to be able to receive the data.
that cause the writing buffer over run condition is received, the execution of these commands is deferred until the blank area of the
buffer grows to be able to receive the data.
When the other disc is mounted, if the WRITE (10), WRITE (12) Command that cause the writing buffer over run condition is
received, these command is terminated with Check Condition status, LOGICAL UNIT NOT READY, LONG WRITE IN
PROGRESS (2/04/08). If the Host receives this error code, the Host waits several time and needs to resend same command.
received, these command is terminated with Check Condition status, LOGICAL UNIT NOT READY, LONG WRITE IN
PROGRESS (2/04/08). If the Host receives this error code, the Host waits several time and needs to resend same command.
The minimum waiting time shows in the Table 40. If this value is used, the size of empty area on the Writing Buffer becomes
128KBytes or more.
128KBytes or more.
Table 40 - Value of Minimum Waiting Time
MEDIA
WRITING SPEED
Minimum waiting time (msec)
16x
6
8x
12
4x
25
2x
50
DVD-R/RW
1x
100
32x
27
24x
36
16x
55
8x
110
CD-R/RW
4x
220