Black Box SW723A-R4 ユーザーズマニュアル

ページ / 111
16
SERVSWITCH™
Panel Label
Description
POWER (left)
Main Power LED: Lights to indicate that unit is powered ON.
ON/OFF
2-port units only: Press this button to turn the ServSwitch ON
or OFF.
[Numbered]
CPU Status LEDs: Numbered pairs of LEDs indicate the
status of the CPU or submaster (cascaded) Serv device
connected to the corresponding port on the rear panel:
SELECT or [unlabeled left] (red)
Lights if the corresponding port is the currently selected port.
POWER or [unlabeled right] (green)
Lights if the device on the corresponding port is powered ON.
NOTE
The 2-port (mini) chassis has 4 each of the Select and
[CPU] Power LED slots. The slimline-model chassis
has 8 each of these slots, and the full-size chassis has
16 each of them. The extra LED slots in the chassis of
the 2-port mini, 4-port slim, and the 8- and 12-port full-
size models are left blank, but are protected by
material mounted inside the chassis.
– or 
Previous Port Button: Press this button to manually switch the
shared monitor, keyboard, and mouse from the currently
selected computer to the previous one in sequence.
+ or 
Next Port Button: Press this button to manually switch the
shared monitor, keyboard, and mouse from the currently
selected computer to the next one in sequence.