Black Box SW723A-R4 ユーザーズマニュアル

5. Operation: On-Screen Display

You can use the ServSwitch’s on-screen display to:

1. Configure the ServSwitch through a series of configuration menus (triggered

with the 

[Ctrl] [F12]

command, where 

[Ctrl]

is the left Control key).

2. Switch to different computers from a window which shows a list of computer

names (triggered with the 

[Ctrl] [ESC]

command, where 

[Ctrl]

is the left

Control key). You can change the color and position of this window.

3. See the name of the computer you are currently switched to. (The font, color,

position, and timing of displayed text are all user-selectable.)

Access the main menu by pressing and releasing the left [Ctrl] key and then hitting
the [F12] key. The menu, shown in Figure 5-1 below, appears. (The “Enter
password” prompt will appear only if you set a configuration password through the
“Configure security” menu; see Section 5.5. If the prompt is on screen, you must
enter this password before the ServSwitch will allow you to make any configuration
changes through the display.)

Main configuration menu

Enter password