Black Box LEH8814 ユーザーズマニュアル

 

VLAN Mode Setting, 802.1Q VLAN Setting,
VLAN 
 
802.1Q VLAN Setting 
VLAN Database: 
1. 

Command Mode: Configure mode 

Logon to Configure Mode (Configure Term
The switch_a(config)# prompt will show 

switch_a(config)# 

 802.1Q Port Setting, Port Based 

inal Mode). 

on the screen. 

 
2. Usage: 
Use vlan database command to enter the
 
3. Command 

Syntax: 

vlan database 
 
4. Example: 
The following example changes to VLAN configuration mode from Configure 
mode: 

switch_a(config)#vlan database 
switch_a(config-vlan)# 

 VLAN configuration mode. 

 

 
Add VLAN/Delete VLAN: 
1. 

Command Mode: VLAN Configure mode 

Logon to Configure Mode (Configure Terminal Mode). 
Logon to VLAN Configure Mode. 
The switch_a(config-vlan)# prompt will show on the screen. 

switch_a(config)#vlan database 
switch_a(config-vlan)# 

 

 
2. Usage: 
This command enables or disables the state of a particular VLAN on a bridge 
basis. Specifying the disable state causes all forwarding over the specified 
VLAN ID on the specified bridge to cease. Specifying the enable state allows 
forwarding of frames on the specified VLAN-aware bridge. 
 
3. Command 

Syntax: 

vlan VLANID bridge GROUP name VLAN_NAME state enable/disable 
no vlan VLANID bridge GROUP 

VLANID The VID of the VLAN that will be enabled or disabled on the bridge 
<2-4094>. 
GROUP <1-1> The ID of the bridge-group on which the VLAN will be