Black Box LEH8814 ユーザーズマニュアル
Black Box Hardened Managed Ethernet Switch
User’s Manual 79
Command Line Conso
anagement
The switch provides a comman
r
configuration purposes. The swit
configured either
locally through its RS-232 port or remotely via a Telnet
session. For the later, you must s
session. For the later, you must s
IP address for the
switch first.
This chapter describes how to configure the switch using its
console by Commend Line.
This chapter describes how to configure the switch using its
console by Commend Line.
le M
d line console interface fo
ch can be
pecify an
Administration Console
Connect the DB9 null-modem or cross over cable to the RS-232 serial port of
the device to the RS-232 serial port of the terminal or computer running the
terminal emulation application.
Direct access to the administration console is achieved by directly connecting
a terminal or a PC equipped with a terminal-emulation program (such as
HyperTerminal) to the switch console port.
When using the management method, configure the terminal-emulation
program to use the following parameters (you can change these settings after
login):
[Default parameters]
115,200bps
8 data bits
No parity
1 stop bit
the device to the RS-232 serial port of the terminal or computer running the
terminal emulation application.
Direct access to the administration console is achieved by directly connecting
a terminal or a PC equipped with a terminal-emulation program (such as
HyperTerminal) to the switch console port.
When using the management method, configure the terminal-emulation
program to use the following parameters (you can change these settings after
login):
[Default parameters]
115,200bps
8 data bits
No parity
1 stop bit