Bay Technical Associates DS62-MD4 ユーザーズマニュアル

26 

To enable TACACS for logins do the following: 

•  Enable TACACS from the TACACS configuration menu. 

•  Enter the IP address of the  TACACS  server 
•  Enter the IP address of the backup TACACS server if any. 

•  Enable local logins as a backup to the TACACS server if needed. 

•  Secret word must match the secret word in the TACACS server configuration.  
•  Enable usernames and passwords for the network and serial port via the logins setup access 

control menu. 

Select TACACS Configuration from the Login Setup Menu and the DS displays the following: 

Select “TACACS Enable” to turn on or off the TACACS authentication on and off.  If enabled, the 
primary TACACS server address must be specified. 

Select “TACACS Server Address” to assign a specific TACACS server IP addresses.   

Select “TACACS Backup Server Address” to assign a specific Backup Server IP addresses.   

Select “TACACS Secret” to assign a secret word shared between the TACACS server and this unit.  A 
secret can be up to 16 characters and must be exactly the same as the secret stored on the server. 

Select “Enable DS62 Usernames as Backup” to allow an unsecured access in case all specified radius 
servers are unavailable.