ZyXEL Communications XGS-4526 ユーザーズマニュアル

Chapter 31 PPPoE

XGS-4526/4528F/4728F User’s Guide

Click the VLAN link in the Intermediate Agent > Port screen to display the 
screen as shown. 

Figure 146   Advanced Application > PPPoE > Intermediate Agent > Port > VLAN 

The following table describes the labels in this screen. 

Table 102   Advanced Application > PPPoE > Intermediate Agent > Port > VLAN

Show Port 

Enter a port number to show the PPPoE Intermediate Agent settings for 
the specified VLAN(s) on the port.

Show VLAN 

Use this section to specify the VLANs you want to configure in the section 
below.

Start VID

Enter the lowest VLAN ID you want to configure in the section below.

End VID

Enter the highest VLAN ID you want to configure in the section below.

Apply

Click Apply to display the specified range of VLANs in the section below.

Port

This field displays the port number specified above.

VID

This field displays the VLAN ID of each VLAN in the range specified above. 
If you configure the * VLAN, the settings are applied to all VLANs.

*

Use this row to make the setting the same for all VLANs. Use this row first 
and then make adjustments on a VLAN-by-VLAN basis. 

Note: Changes in this row are copied to all the VLANs as soon as 

you make them.

Circuit-id 

Enter a string of up to 63 ASCII characters that the Switch adds into the 
Agent Circuit ID sub-option for this VLAN on the specified port. Spaces 
are allowed.

The Circuit ID you configure here has the highest priority.