Linksys SRW224G4 ユーザーズマニュアル
Chapter 5
Advanced Configuration
27
WebView Switches
VLAN Management > Port Setting
The VLAN Port Setting screen provides parameters for
managing ports that are part of a VLAN. The port default
VLAN ID (PVID) is configured on the VLAN Port Setting
screen. All untagged packets arriving to the device are
tagged by the ports PVID.
managing ports that are part of a VLAN. The port default
VLAN ID (PVID) is configured on the VLAN Port Setting
screen. All untagged packets arriving to the device are
tagged by the ports PVID.
VLAN Management > Port Settings
Port
The port number included in the VLAN.
Mode
Indicates the port mode. Possible values are:
General
•
The port belongs to VLANs, and each VLAN
is user-defined as tagged or untagged (full 802.1Q
mode).
mode).
Access
•
The port belongs to a single untagged VLAN.
When a port is in Access mode, the packet types which
are accepted on the port (packet type) cannot be
designated. It is also not possible to enable or disable
ingress filtering on an access port.
are accepted on the port (packet type) cannot be
designated. It is also not possible to enable or disable
ingress filtering on an access port.
Trunk
•
The port belongs to VLANs in which all ports are
tagged (except for an optional single native VLAN).
Acceptable Frame Type
Packet type accepted on the
port. Possible values are:
Admit All
•
Indicates that both tagged and untagged
packets are accepted on the port.
Admit Tag Only
•
Indicates that only tagged packets
are accepted on the port.
PVID
Assigns a VLAN ID to untagged packets. The
possible values are 2–4094. VLAN 4095 is defined as
per standard and industry practice as the discard VLAN.
Packets classified to the Discard VLAN are dropped.
per standard and industry practice as the discard VLAN.
Packets classified to the Discard VLAN are dropped.
Ingress Filtering
Enables or disables Ingress filtering on
the port. Ingress filtering discards packets which do not
include an ingress port.
include an ingress port.
LAG
Indicates the LAG to which the VLAN is defined.
VLAN Management > Ports to VLAN
The Ports to VLAN screen contains fields for configuring
ports to a VLAN. The port default VLAN ID (PVID) is
configured on the Create VLAN screen. All untagged
packets arriving to the device are tagged by the ports
PVID.
ports to a VLAN. The port default VLAN ID (PVID) is
configured on the Create VLAN screen. All untagged
packets arriving to the device are tagged by the ports
PVID.
VLAN Management > Ports to VLAN
The Ports to VLAN screen contains a Port Table for VLAN
parameters for each port. Ports are assigned VLAN
membership by selecting and configuring the presented
configuration options.
parameters for each port. Ports are assigned VLAN
membership by selecting and configuring the presented
configuration options.
VLAN
The VLAN number.
Access
Indicates the port belongs to a single untagged
VLAN. When a port is in Access mode, the packet types
which are accepted on the port cannot be designated.
Ingress filtering cannot be enabled or disabled on an
access port.
which are accepted on the port cannot be designated.
Ingress filtering cannot be enabled or disabled on an
access port.
Trunk
Indicates the port belongs to VLANs in which
all ports are tagged, except for one port that can be
untagged.
untagged.
General
Indicates the port belongs to VLANs, and each
VLAN is user-defined as tagged or untagged (full 802.1Q
mode).
mode).
Tagged
Defines the interface as a tagged member of a
VLAN. All packets forwarded by the interface are tagged.
The packets contain VLAN information.
The packets contain VLAN information.
Untagged
Packets forwarded by the interface are
untagged.
Forbidden
Forbidden ports are not included in the
VLAN.
Exclude
Excludes the interface from the VLAN. However,
the interface cannot be added to the VLAN through
GVRP.
GVRP.