Linksys SRW208G ユーザーズマニュアル

This is the approximate length of the cable. 

The Cable Length test can be performed only when the 

port is up and operating at 1Gbps.

Admin > Save Configuration

After you download a new image file, the device should 

be rebooted. If you are downloading a new boot image, 

please follow these steps: 

Download the new boot code.

1. 

 

  While  inputting  the  boot  code, 

refrain from reseting the device.

Download the new software image. 

2. 

Reset the device now.

3. 

Select this option to upgrade the switch from a 

file located on a TFTP server.

 

•

The TFTP Server IP Address that contains 

the source file to upgrade from.

 

•

Specifies the name of the upgrade file on 

the TFTP server.

To  back  up  the  switch  configuration  via  TFTP, 

enter the TFTP server address.

 

•

Specifies the TFTP Server IP Address to 

which the configuration file will be saved.

 

•

Specifies  the  name  of  the 

configuration file. The default is StartupCfg.cfg.

This  HTTP  Firmware  Upgrade  screen  is  used  for  saving 

configuration information using your web browser.

Select this option to upgrade the switch from a 

file on the local hard drive.

 

•

Type in the name and path of the file or 

click Browse to locate the upgrade file.

The  Proceed  button  is  used  to  backup  the 

configuration to the local hard drive.

Admin > FIrmware Upgrade

The  Firmware  Upgrade  screen  contains  the  following 

fields:

Defines the upgrade through a TFTP Server.

Allows you to upgrade the firmware using your 

Web browser.

Defines the screen functionality as a Firmware 

upgrade.

Defines  the  screen  functionality  as  a  Firmware 

backup.

Specifies  the  TFTP  Server  IP 

Address from which files are downloaded.

Specifies the file to be downloaded.

Specifies  the  destination  file 

type to which to the file is downloaded. The possible field 

values are:

Downloads the image file.

Downloads the boot file.