JVC LVT1041-002A ユーザーズマニュアル
17
Using the CD Player
You can use Normal, Random, Program or Repeat Play. Re-
peat Play can repeat all the tracks or just one of the tracks
on the CD.
Here are the basic things you need to know to play a CD and
locate the different tracks on it.
peat Play can repeat all the tracks or just one of the tracks
on the CD.
Here are the basic things you need to know to play a CD and
locate the different tracks on it.
This Unit has been designed only to playback the follow-
ing CDs.
• Digital audio CD
• Recordable digital audio CD (CD-R)
• Rewritable digital audio CD (CD-RW)
ing CDs.
• Digital audio CD
• Recordable digital audio CD (CD-R)
• Rewritable digital audio CD (CD-RW)
When playing a CD-R or CD-RW
You can play back finalized CD-R or CD-RW recorded
music CD format. (If CD-RW have been recorded in a
different format, erase all the data on CD-RW complete-
ly before recording on the disc.)
❑ You can play back CD-R or CD-RW like CD.
❑ Some CD-R or CD-RW may not be played back on
You can play back finalized CD-R or CD-RW recorded
music CD format. (If CD-RW have been recorded in a
different format, erase all the data on CD-RW complete-
ly before recording on the disc.)
❑ You can play back CD-R or CD-RW like CD.
❑ Some CD-R or CD-RW may not be played back on
this Unit because of their disc characteristics, damage
or stain on them, or if the player lens is dirty.
or stain on them, or if the player lens is dirty.
❑ The reflection factor of CD-RW is lower than that of
other CD, possibly causing CD-RW to take longer to
read.
read.
❑ CD-R and CD-RW of MP3 format are not played
back.
The Quickest Way To Start a CD Is With the One
Touch Operation
Touch Operation
❑ Press the CD 6 button on the Remote Control.
• The power is automatically turned on and, if a CD is
• The power is automatically turned on and, if a CD is
already inserted, it will start playing from the first track.
• If no CD is inserted, “CD NO DISC” appears on the dis-
play and the CD Player remains in Stop mode.
To Insert a CD
1
Select the source “CD” using the
Source selector on the Unit.
Source selector on the Unit.
2
Press the
0
CD button on the Unit or
the CD DOOR
0
button on the Remote
Control.
The CD door opens.
3
Place a CD, with its label side up as
shown below. Press down on the CD’s
center until you hear a click.
shown below. Press down on the CD’s
center until you hear a click.
4
Press the
0
CD button on the Unit or the
CD DOOR
0
button on the Remote Con-
trol again to close the CD door.
“CD DOOR CLOSE” appears and then, “CD READ-
ING” appears on the display. At that time, Disc indica-
tor (
ING” appears on the display. At that time, Disc indica-
tor (
) will also be lit on the display.
• To close the CD door and play the CD, you can just
press the
6
button on the Unit or the CD
6 but-
ton on the Remote Control.
❑ You can place an 8 cm CD without an adaptor.
❑ If the CD cannot be read correctly (because it is scratch-
ed, for example), “CD CAN’T PLAY” appears on the
display.
display.
Source
selector
selector
0 CD
SET
2
Numeric
Keys
REPEAT
5
∞
CD
6
3
CD DOOR
0
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
¢
7
6
CD door
CANCEL
Disc
indicator
indicator
Play mode
indicator
indicator
4
7
Repeat indicator
FM/PLAY MODE
FS-X5(B)_E.book Page 17 Friday, March 28, 2003 2:49 PM