Minicom Advanced Systems DX System ユーザーズマニュアル
DX SYSTEM
21
Figure 19 DX Network Configuration
Here you configure the DX Central’s network settings.
All DX Centrals come with the following predefined settings:
·
IP Address: 192.168.0.245
·
Subnet Mask: 255.255.255.0
3. If the above predefined settings are not suitable for your network, type suitable
parameters into the DX Network Configuration box.
4. Click
. The Define DX status box appears. See Figure 20.
Figure 20 Define DX status box
5. Select Primary unit and click
.
6. Click
. The Login screen appears.
Before logging in you must configure the slaves.
7. Power on the DX User connected to a slave DX Central. The Configuration
wizard appears as set out above.
8. Check Cascaded DX configuration and click
. The DX Network
Configuration box appears. See Figure 19.