Motorola P880 ユーザーズマニュアル

2 - 14

Cajun P880 Routing Switch Installation Guide

this value lower than 1024 (the output buffer’s capacity). Set 
this value lower if the port is experiencing overflow 
problems.

14. From the Pace Priority Mode pull-down menu, select Enable 

if you want this port to recognize and use 3Com’s PACE priority 
mechanism. 

15. Click APPLY to save your changes, or CANCEL to restore 

previous settings.

Table10 describes the Fast Ethernet port parameters: 

A user-assigned name for this port (possibly a 
drop name or the name of the station or other 
device connected to the port).

Allows you to select either User Port or Service 
Port. 

• The 

User Port is intended for use with 

switch connections to end user nodes. 

• The 

Service Port is intended for use with 

switch connections to servers or other 
switches. The Service Port allows the switch 
to generate both log messages and alarm 
messages (traps). The User Port only generates 
log messages, preventing your network 
management station from being 
overwhelmed by port up/down messages 
that result from users turning workstations 
on and off.

Allows you to select the speed of the port 
manually (to either 10 or 100 Mb/s).

Allows you set the port duplex mode (half- or 
full-duplex).