Motorola P880 ユーザーズマニュアル

Cajun P880 Routing Switch Installation Guide 

2 - 33

If the PPP serial port console is configured incorrectly, the command 
line interface (CLI) becomes temporarily unavailable for 
reconfiguration. 

To regain access to the CLI when the console port is in PPP mode:

1. In the console window, type TTY. The CLI login prompt displays. 

It may be necessary to press Enter several times to see the login 
prompt. You may see the modem init command string.

2. At the Login prompt, enter your user name. The password 

prompt displays.

3. At the Password prompt, enter your password. The Cajun CLI 

prompt displays.

4. Enter the PPP configuration commands necessary to start PPP. 

Refer to “Configuring the Serial Console Port as a PPP Console”, 
earlier in this chapter, and “Creating an IP Interface”, in Chapter 
7, for more information on PPP configuration commands.

5. After you complete your configuration settings, type exit at the 

CLI prompt to reinvoke the modem control software and exit 
CLI mode.

* Note:  You do not need to exit from CLI if the serial 

port console has been configured as a TTY 
console, or if you do not intend to re-attempt 
connecting using PPP.

To configure your PC for dial-up networking with a PPP serial port 
console:

1. From My Computer, double-click Dial-Up Networking. The 

Dial-Up Networking dialog box opens.

* Note:  You must have dial-up networking installed on 

your PC.

2. Double-click Make New Connection to configure your 

modem. The Make New Connection wizard opens.

3. In the Type a name for the computer you are dialing field, 

enter a 

connection name for the computer you are dialing.

4. From the Select a Modem pull-down menu, select your 

modem and click Configure. The Modem Properties dialog box 
opens.

5. Click the Connection tab. The Connection tab opens.