Motorola P880 ユーザーズマニュアル

2 - 50

Cajun P880 Routing Switch Installation Guide

5. Replace the failed primary controller by inserting it in the slot to 

the right of the redundant controller and to the left of element 
three.

6. Restart the switch and login.

7. In the System Information section of the Web Agent, click 

Switch Fabric. The Switch Fabric Status dialog box displays.

8. From the Configure Redundant Hardware pull-down menu, 

select 

9. Click APPLY to enable the redundant controller.

The Switch Controller field displays # 1 Active to show that the 
redundant controller is now enabled.

10. In the Toggle Active Controller field, click Toggle to restore 

control to the primary controller.

The Switch Controller field displays # 0 Active to show that the 
primary controller is now enabled.

If an element fails, you are notified by a console message and an 
event log message. In the Web Agent, the Switch Elements field 
displays # Failed <number>, where 

<number>

 is the number that 

indicates the failed element.

To configure the redundant element:

1. In the System Information section of the Web Agent window, 

click 

Switch Fabric. The Switch Fabric Status dialog box 

displays.

2. From the Configure Redundant Hardware pull-down menu, 

select 

No.

3. Click Apply to disable the failed element.

4. Shut down the switch.