Motorola P120 ユーザーズマニュアル
Chapter 6
Legacy CLI (Command Line Interface)
40
Cajun P120 User’s Guide
Ping <IP_address> {#times}
Pings the IP address; default is four times
Use the Ctrl+Q command to stop the pinging.
Use the Ctrl+Q command to stop the pinging.
revision
Displays revision information for the various
components.
components.
rnds [on|off]
This is reserved for technical personnel only.
service
This is reserved for technical personnel only.
show <all|group> [list]
<port#|index_value>
Example: show ip
<port#|index_value>
Example: show ip
Displays the current configuration settings for
a specific group or port. If you have made any
changes using the CLI, they are listed in a
column on the left (administration) and the
current operational configuration is in a
column on the right.
a specific group or port. If you have made any
changes using the CLI, they are listed in a
column on the left (administration) and the
current operational configuration is in a
column on the right.
shLAG <group#|all>
Shows all ports that are assigned to a link
aggregation group.
aggregation group.
shport
Display a table of all ports.
simple-setup
This command is only available in
Normal level.
This command is only available in
Normal level.
For the configuration of the initial parameters
needed for the Cajun P120, including its IP
address.
needed for the Cajun P120, including its IP
address.
vlantab
Displays a table with VLAN assignments of
ports.
ports.
Table 6.1
Normal Level Commands (Continued)
Command Syntax
Function