Acer R910 Series ユーザーズマニュアル
39
Installing the CPU air baffle
1
Observe the ESD precautions and pre-installation instructions
described on page 33.
described on page 33.
2
Insert the front of the CPU air baffle under the two metal tabs at
the front of the baffle, just below the SCSI backplane board. One
tab is located on each side of the chassis.
the front of the baffle, just below the SCSI backplane board. One
tab is located on each side of the chassis.
3
Lower the rear of the baffle into place, making sure the guides on
each side of the air baffle will correctly engage in the left and
right chassis slots.
each side of the air baffle will correctly engage in the left and
right chassis slots.
4
Push down the air baffle to the two locations where the word
Memory is printed on the air baffle.
Memory is printed on the air baffle.
5
Observe the post-installation instructions described on page 34.