Acer R910 Series ユーザーズマニュアル
69
6
Insert the VRM into the correct VRM connector and press down
firmly (B).
firmly (B).
7
Press the holding clips inward to lock the VRM in place.
8
Install the VRM baffle over the processor 4 core VRM, if installed.
9
Observe the post-installation instructions described on page 34.
Memory board
The memory boards that are configured in a non-redundant
configuration (including memory boards configured with spare
memory) must not be removed while the system is powered on.
configuration (including memory boards configured with spare
memory) must not be removed while the system is powered on.
Note: If you remove a memory board from the server, you must
replace it with a replacement memory board or a memory board
air baffle.
replace it with a replacement memory board or a memory board
air baffle.
Important: Refer to the memory board installation order table
on page 158 when installing and removing memory boards.
on page 158 when installing and removing memory boards.
Processor 3 VRM
Processor 4 VRM