Intel 5800/120Ld ユーザーズマニュアル
System Cabling A-5
A – Diskette drive connector
H – Ultra2 SCSI interface cable
B – Diskette interface cable
I – Optional SCSI removable media devices
C – Diskette drive
J – Ultra-160/M SCSI connector (68 pin)
D – IDE connector
K – Ultra-160/M SCSI interface cable
E – IDE interface cable
L – Four SCSI disk drives
F – IDE CD-ROM drive
M – System board
G – Ultra2 SCSI connector (68 pin)
Figure A-2. Standard System Cable Configuration (Standard Drive Bay)
RAID Configuration
The RAID options available for your system provide your system with the added
security of fault tolerance.
security of fault tolerance.
If you order a system with a RAID controller, the system is pre-cabled at the factory
(see "RAID System Cabling Configuration" figures below.)
(see "RAID System Cabling Configuration" figures below.)
If you are adding a RAID controller you must install, cable, and configure the
controller. Refer to "Installing a RAID Controller Board" in Chapter 4.
controller. Refer to "Installing a RAID Controller Board" in Chapter 4.