Intel 5800/120Ld ユーザーズマニュアル
B-2 Management Workstation Application
Overview
Management Workstation Application (MWA) is an application used for remote
server management in a network environment. The managed server may be
remotely accessed from a management PC (the computer in which ESMPRO™
operates). MWA is a pre-boot management application in that the managed
server is accessed prior to loading the server operating system. See Figure B-1.
server management in a network environment. The managed server may be
remotely accessed from a management PC (the computer in which ESMPRO™
operates). MWA is a pre-boot management application in that the managed
server is accessed prior to loading the server operating system. See Figure B-1.
Management PC
Workstation
ROM Pilot
Server
BMC
ROM Pilot
MWA
Figure B-1. Managed Server Configuration
The following server operations are available from a management PC running
MWA software:
MWA software:
!
Remote console control — This function enables you to see the screen
of a server from the console of the management PC and to key in data to
the server from the keyboard of the management PC.
of a server from the console of the management PC and to key in data to
the server from the keyboard of the management PC.
!
Remote drive access — This function enables a server to access a
floppy disk drive on the management PC. A server can also be booted
from the floppy disk on the management PC.
floppy disk drive on the management PC. A server can also be booted
from the floppy disk on the management PC.
!
SOS recovery — If a SOS message is received from a server, MWA
receives the fault information and sends the necessary instructions to the
server for recovery.
receives the fault information and sends the necessary instructions to the
server for recovery.
!
Alert to ESMPRO™ — If MWA receives an alert message from a
server, it sends this message to ESMPRO™ AlertManager.
server, it sends this message to ESMPRO™ AlertManager.
!
Power cycling — This function enables powering the server OFF and
ON.
ON.
!
Reset control — This function enables reset of the server.
!
Event Log retrieval — All event log data recorded in the server is
retrieved by the management PC.
retrieved by the management PC.