Intel 5800/120Ld ユーザーズマニュアル

The Data dialog box displays the CMOS, ESCD, or DMI data of a server. This
dialog box also allows the following operations.

!

 

Compare Current Data — The previously acquired data of the current
server is compared with the present data of the server, the previously
acquired data of another server, or file data.

To compare with the data of another server, select a server in the Select a
server dialog box. If an error is detected by this comparison, the Data
Differences dialog box displays the compared data.

!

 

Read Data from Server — The present data of the current server is
acquired and displayed. The Save As button is used to save the acquired
data in a file.

The Temporary Change to Remote Drive dialog box changes a remote drive for
a server temporarily.

If [Floppy A:] is checked, a floppy disk drive on MWA-active management PC
becomes a remote drive for the server.

If [FD Image File:] is checked, a specified FD image file in the management PC
becomes a remote drive for the server.

If [Read Only] is checked, one FD image file can be used by more than one
server. Since no FD image file can be created or copied in this dialog box, create
a file using the Defaults command or the Properties command in advance.