Intel 5800/120Ld ユーザーズマニュアル

CD-ROM devices contain a laser system and are classified
as CLASS 1 LASER PRODUCTS. To use these devices,
thoroughly read the documentation provided by the CD-
ROM manufacturer, and keep the documentation for future
reference. In case of any trouble with a CD-ROM, please
contact your nearest service representative. To prevent
direct exposure to the laser beam, do not try to open the
enclosure. Use of controls or adjustments or performance of
procedures other than those specified in the CD-ROM
manufacturer's documentation may result in hazardous
radiation exposure

1.  Power off the system and ensure it is disconnected from the AC power

source.

2.  Open the front door as described earlier in this chapter.

3.  Remove the left side panel as described earlier in this chapter.

Observe static precautions. Use an antistatic wrist strap.

4.  Perform Steps 4, 5, and 6 of Removing the 3.5-Inch Diskette Drive described

earlier in this chapter. It is not necessary to remove the diskette drive from
the mounting bracket to which it is mounted.

5.  Remove the filler panel from the system bay location you are installing a

media device. The filler panel is released by removing one screw located on
the front right side of the filler panel (Figure 4-27, A) and another screw
located inside the system on the left side of the filler panel (Figure 4-27, B).

A

B