HP (Hewlett-Packard) ML330 G6 ユーザーズマニュアル
Operations 25
3.
4.
Place the tower server on its side.
5.
6.
Disconnect the power cable from the processor board.
7.
Using a T-15 Torx screwdriver, remove the screws securing the processor board.
8.
Remove the processor board.
9.
Using the wrench provided in the kit, remove the mezzanine support stand-offs.
10.
Remove the metal plate.
Install the processor board
1.
2.
Do one of the following: