HP (Hewlett-Packard) ML330 G6 ユーザーズマニュアル
Hardware options installation 60
9.
Connect the optical drive cable to the rear of the optical drive and to the SATA connector on the system
board.
10.
Remove the applicable bezel blank from the bezel ("
" on page
11.
12.
Do one of the following:
o
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
13.
USB tape drive option
For clarity, the following illustrations include option cabling only.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To install the component:
1.
2.
Do one of the following:
o
Open or remove the tower bezel, as needed ("
" on page
o
3.
4.
Remove the applicable media bay blank ("
" on page
5.
Identify the guide screws ("
" on page