HP (Hewlett-Packard) DL100 Series ユーザーズマニュアル
Item Description
Definition
4
Memory speed
10600 = 1333-MHz
8500 = 1067-MHz
8500 = 1067-MHz
5
DIMM type
R = RDIMM (registered)
E = UDIMM (unbuffered with ECC)
E = UDIMM (unbuffered with ECC)
For the latest supported memory information, see the QuickSpecs on the HP website
General DIMM slot population guidelines
•
The HP ProLiant DL120 G6 Server has six memory slots.
•
There are two channels per server with three DIMM slot per channel.
•
Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
•
Memory channel 2 consists of the three (3) DIMMs that are furthest from the processor
•
Different types of processors have different types of memory support.
•
The server supports up to 12 GB (6 x 2-GB) for Registered Memory configurations.
•
ory configurations.
PC3 DIMMs.
ered memory (RDIMMs).
a channel.
ithin a channel goes furthest from the CPU.
•
s per channel.
MMs, the quad-rank DIMM must be installed first on that channel.
ad-rank UDIMMs are not supported.
IMMs.
ollowing sequence:
ollowing sequence:
IMM 5D
M 4F
The server supports up to 8 GB (4 x 2-GB) for Unbuffered Mem
Observe the following guidelines when installing DIMMs:
•
Do not mix Unbuffered and Registered
•
Do not mix DIMMs of varying speeds.
•
Do not mix DIMMs of varying voltages.
•
Do not mix Unbuffered memory (UDIMMs) with Regist
•
Do not install DIMMs if the processor is not installed.
•
Populate DIMMs from heaviest load (double-rank) to lightest load (single-rank) within
•
Heaviest load (DIMM with most ranks) w
•
Non-ECC DIMMs are not supported
•
Each channel supports up to two Unbuffered DIMMs.
•
When using UDIMMs, use ECC only.
When possible, balance the load
When possible, balance the load
•
If quad-rank DIMMs are installed for the processor, a maximum of two DIMMs can be installed on
each channel for that processor.
each channel for that processor.
•
If a channel contains quad-rank DI
•
256MB technology, x4 DRAM on UDIMMs and qu
•
Always use HP qualified D
Populate the DIMM slots in the f
•
DIMM 3A and DIMM 6B
•
DIMM 2C and D
•
DIMM1E and DIM
Hardware options installation 23