HP (Hewlett-Packard) L700 (CTL700) ユーザーズマニュアル
Configuring and Testing the Tape Library
5- 13
Tape Drive Targeting
Audit Definitions
An audit is the process of checking each cell within a tape library. If a cell contains a
tape cartridge, the camera reads the VOLSER and transfer this data to the MPC card.
The MPC card calculates the robotic position of the hand assembly (by referencing the
theta and Z positions) and catalogs the tape cartridge location by:
tape cartridge, the camera reads the VOLSER and transfer this data to the MPC card.
The MPC card calculates the robotic position of the hand assembly (by referencing the
theta and Z positions) and catalogs the tape cartridge location by:
•
VOLSER
•
SCSI element number or panel, row, column
If a customer cell is empty, the location is recorded as “cell empty.” The reserved cells
(explained later in this section) are checked for cleaning cartridges (which
automatically configure the auto clean option) and for diagnostic test cartridges.
(explained later in this section) are checked for cleaning cartridges (which
automatically configure the auto clean option) and for diagnostic test cartridges.
When all customer and reserved cell locations are read and cataloged, the tape library
audit is complete. However, the tape library audit information must be requested by the
host system to update its tape cartridge volume database.
audit is complete. However, the tape library audit information must be requested by the
host system to update its tape cartridge volume database.
This two-step process-tape library audit and host update ensures that both the tape
library and host have current (and identical) listings of the tape library contents.
library and host have current (and identical) listings of the tape library contents.
Audit Conditions
An audit begins when:
•
The tape library is powered on.
•
The RESET button on the operator panel is pressed.
•
The tape library access door is opened and closed.
•
A system request to audit the tape library is entered t the host console.
Tape Drive Targeting
In the next step of the initialization process, the robot moves to each tape drive and
calculates the position of the drive’s target. This ensures accurate loading of tapes
during tape library operation.
calculates the position of the drive’s target. This ensures accurate loading of tapes
during tape library operation.
Audit Drive Targeting
After tape drive targeting, the robot audits the 12 cells of the reserved area, located
below CAP B (for tape libraries with two CAPs) or below the front viewing window (for
tape libraries with one CAP).
below CAP B (for tape libraries with two CAPs) or below the front viewing window (for
tape libraries with one CAP).
Note.
Tape cartridges left in the drives are not audited.