HP (Hewlett-Packard) BL460C G6 ユーザーズマニュアル

 

Hardware options installation 40 

•

 

Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security 

rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider 

the system compromised and take appropriate measures to ensure the integrity of the system data. 

•

 

When using BitLocker™, always retain the recovery key/password. The recovery key/password is 

required to enter Recovery Mode after BitLocker™ detects a possible compromise of system integrity. 

•

 

HP is not liable for blocked data access caused by improper TPM use. For operating instructions, see 

the encryption technology feature documentation provided by the operating system. 

 

Installing the Trusted Platform Module board 

  

 

WARNING:

  To reduce the risk of personal injury from hot surfaces, allow the drives and the 

internal system components to cool before touching them. 

  

1. 

Power down the server blade (on page 

2. 

Remove the server blade (on page 

3. 

Place the server blade on a flat, level work surface. 

4. 

Remove the access panel (on page 

). 

5. 

Remove all hard drives ("

). 

6. 

Remove the hard drive backplane. 

 

7. 

Remove the two T-15 screws from the front panel/hard drive cage assembly.