HP (Hewlett-Packard) BL25P ユーザーズマニュアル

6.  Use the iLO Virtual Power Button feature to reboot the server blade. 

7.  After the server blade boots, follow the normal network installation 

procedure for the OS. 

 

The server blade provides FC support for SAN implementations. This solution 
uses an optional FCA that offers redundant SAN connectivity and optimization 
for HP StorageWorks products. The server blade is also compatible with certain 
third-party SAN products. For more information, refer to the documentation that 
ships with the FCA option. 

For optimal SAN connectivity, observe the following guidelines: 

• 

• 

• 

The FCA option is installed correctly in the server blade. Refer to the 
documentation that ships with the FCA option. 

An FC-compatible interconnect is installed in the enclosure. Refer to the 
documentation that ships with the interconnect option. 

The server blade enclosure management module firmware is up-to-date. 
Refer to the HP Business Support Center website 
(

• 
• 

The server blade is cabled properly to a supported SAN. 

SAN storage drivers are loaded. Refer to supporting white papers and the HP 
website (

For SAN configuration information for the server blade, refer to the HP 
StorageWorks SAN Design Reference Guide on the HP website 
(

 

SmartStart Software......................................................................................................................

HP ROM-Based Setup Utility ......................................................................................................

Array Configuration Utility ..........................................................................................................