Gateway 7450R ユーザーズマニュアル
Replacing and Adding Internal Devices
37
To replace the secondary processor:
1
Turn off the system and disconnect the power cord and all external
peripheral devices.
peripheral devices.
2
Open the case. See “Opening the case” on page 18 and “Preventing static
electricity discharge” on page 17.
electricity discharge” on page 17.
3
Unclip the heatsink by pressing down on the top of the clip, then pushing
the top of the clip toward the heatsink.
the top of the clip toward the heatsink.
4
Remove the processor by pulling the lever arm slightly away from the
processor socket, then lifting it to a ninety-degree angle.
processor socket, then lifting it to a ninety-degree angle.
5
Lift the old processor out of the socket.
Clip
Hook
1
2
8507328.book Page 37 Thursday, February 15, 2001 11:28 AM