HP (Hewlett-Packard) 686713-S01 ユーザーズマニュアル
Component identification 14
Item
Description
Status
1
Power cap
To determine Power cap status, see
)."
2
AMP Status
Green = AMP mode enabled
Amber = Failover
Off = AMP mode disabled
Off = AMP mode disabled
3
DIMM LEDs
Amber = DIMM error
Off = Normal
Off = Normal
All other LEDs
Amber = Failure
Off = Normal
Off = Normal
IMPORTANT:
If more than one DIMM slot LED is illuminated, further troubleshooting is required.
Test each bank of DIMMs by removing all other DIMMs. Isolate the failed DIMM by replacing
each DIMM in a bank with a known working DIMM.
each DIMM in a bank with a known working DIMM.
Systems Insight Display LED combinations
When the health LED on the front panel illuminates either amber or red, the server is experiencing a health
event. Combinations of illuminated Systems Insight Display LEDs, the system power LED, and the health LED
indicate system status.
indicate system status.
Systems Insight Display
LED and color
Health LED
System power
LED
Status
Processor (amber)
Red
Amber
One or more of the following conditions
might exist:
•
Processor in socket X has failed.
•
Processor X is not installed in the socket.
•
Processor X is unsupported.
•
ROM detects a failed processor during
POST
Processor (amber)
Amber
Green
Processor in socket X is in a pre-failure
condition.
condition.
DIMM (amber)
Red
Green
One or more DIMMs have failed.
DIMM (amber)
Amber
Green
DIMM in slot X is in a pre-failure condition.
Overtemperature (amber) Amber
Green
The Health Driver has detected a cautionary
temperature level.
Overtemperature (amber) Red
Amber
The server has detected a hardware critical
temperature level.
temperature level.
Fan (amber)
Amber
Green
Fan has failed or is missing, but still meets the
minimum fan requirements.
minimum fan requirements.
Fan (amber)
Red
Green
Fan has failed or is missing and no longer
meets the minimum fan requirements.
Power supply (amber)
Red
Amber
•
Only one power supply installed and in
standby mode.
•
Power supply fault
•
System board fault