HP (Hewlett-Packard) 686713-S01 ユーザーズマニュアル
Setup 38
To install an operating system on the server with Intelligent Provisioning (local or remote):
a.
Connect the Ethernet cable, and then power on the server.
b.
During server POST, press the F10 key.
c.
d.
At the 1 Start screen, click the Configure and Install button.
e.
To finish the installation, follow the on-screen prompts. An Internet connection is required to update
the firmware and systems software.
•
Remote deployment installation—To remotely deploy an operating system, use Insight Control server
deployment for an automated solution.
For additional system software and firmware updates, download the HP Service Pack for ProLiant from the HP
website (
website (
). Software and firmware must be updated before using
the server for the first time, unless any installed software or components require an older version. For more
information, see Keeping the system current (on page
information, see Keeping the system current (on page
The Smart Update Firmware DVD ISO is also available at the download tab on the HP website
For more information on using these installation methods, see the HP website (
Registering the server
To register the server, refer to the HP Registration website (