HP (Hewlett-Packard) 686713-S01 ユーザーズマニュアル

ページ / 127
 
Hardware options installation  45 
For rack models, if removed, install the security bezel (on page 
). 
 
Memory options 
   
 
IMPORTANT:
  This server does not support mixing LRDIMMs, RDIMMs, or UDIMMs. Attempting 
to mix any combination of these DIMMs can cause the server to halt during BIOS initialization. 
  
The memory subsystem in this server can support LRDIMMs, RDIMMs, or UDIMMs: 
 
UDIMMs represent the most basic type of memory module and offer lower latency in one DIMM per 
channel configurations and (relatively) low power consumption, but are limited in capacity. 
 
RDIMMs offer larger capacities than UDIMMs and include address parity protection. 
 
LRDIMMs support higher densities than single- and dual-rank RDIMMs, and higher speeds than 
quad-rank RDIMMs. This support enables you to install more high capacity DIMMs, resulting in higher 
system capacities and higher bandwidth. 
All types are referred to as DIMMs when the information applies to all types. When specified as LRDIMM, 
RDIMM, or UDIMM, the information applies to that type only. All memory installed in the server must be the 
same type. 
The server supports the following DIMM speeds: 
 
Single- and dual-rank PC3-10600 (DDR-1333) RDIMMs operating at up to 1333 MT/s 
 
Single- and dual-rank PC3-12800 (DDR-1600) RDIMMs operating at up to 1600 MT/s 
 
Single- and dual-rank PC3-10600 (DDR-1333) UDIMMs operating at up to 1333 MT/s 
 
Quad-rank PC3L-10600 (DDR3-1333) LRDIMMs, operating as dual-rank DIMMs, at up to 1333 MT/s 
Speed, voltage, and capacity 
 
DIMM type 
DIMM rank 
DIMM capacity 
Native speed (MT/s) 
Voltage 
RDIMM 
Dual-rank 
8GB 
1333 
LV 
RDIMM 
Single-rank 
8GB 
1600 
STD 
RDIMM 
Dual-rank 
16GB 
1333 
LV 
LRDIMM 
Quad-rank 
32GB 
1333 
LV 
UDIMM 
Dual-rank 
8GB 
1333 
LV 
 
Depending on the processor model, the number of DIMMs installed, and whether LRDIMMs, UDIMMs, or 
RDIMMs are installed, the memory clock speed can be reduced to 1333 or 1066 MT/s. Clock speed can 
also be reduced when using low voltage DIMMs. 
Populated DIMM speed (MT/s) 
 
DIMM type  DIMM rank 
1 DIMM 
per 
channel 
— 
2 DIMMs per 
channel 
— 
3 DIMMs per 
channel 
— 
— 
— 
1.35V 
1.5V 
1.35V 
1.5V 
1.35V 
1.5V 
RDIMM 
Dual-rank (8GB)  1333 
1600 
1333 
1600 
1066* 
1066 
RDIMM 
Single-rank (8GB)  1333 
1600 
1333 
1600 
1066 
1066 
RDIMM 
Dual-rank (16GB)  1333 
1600 
1333 
1600 
1066* 
1066 
LRDIMM 
Quad-rank 
(32GB) 
1333** 
1333 
1333** 
1333 
1066 
1066