Fujitsu RX900 S1 ユーザーズマニュアル
RX900 S1
Maintenance Manual
101
7
Fan modules
The server is supplied with four hot-plug fan modules in a 3+1 redundant
configuration. In other words, if one of the four fan modules fails, the system will
operate without any problem.
configuration. In other words, if one of the four fan modules fails, the system will
operate without any problem.
V
CAUTION!
●
Do not disassemble the power supply unit. Doing so may cause
electric shock.
electric shock.
●
Do not damage or modify internal cables or devices.Doing so may
cause a device failure, fire, or electric shock.
cause a device failure, fire, or electric shock.
●
Devices inside the server remain hot after shutdown. Wait for a while
after shutdown before installing or removing internal options.
after shutdown before installing or removing internal options.
●
The circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Before handling them, first
touch a metal part of the server to discharge static electricity from
your body.
and can be damaged by static electricity. Before handling them, first
touch a metal part of the server to discharge static electricity from
your body.
●
Do not touch the circuitry on boards or soldered parts. Hold the
metallic areas or the edges of the circuit boards.
metallic areas or the edges of the circuit boards.
●
If devices are installed or disassembled using methods other than
those outlined in this chapter, the warranty will be invalidated.
those outlined in this chapter, the warranty will be invalidated.
●
The installation indicated on this note is sometimes changed to the
kind of possible options without notice.
kind of possible options without notice.
●
Follow the safety instructions in the chapter