Fujitsu RX900 S1 ユーザーズマニュアル
160
Maintenance Manual
RX900
S1
Expansion cards and BBU
Ê
Press the green button (1).
Ê
Lift the handle (2) to disconnect the PCI Riser (PCIR) from the baseboard.
Ê
Pull the PCIR up and out by using the handle (3).
8.9.4
Removing the expansion card from the slot
Figure 91: Removing the expansion card from the slot
Ê
If applicable, remove the cables from the expansion card.
Remove the slot lock by pulling the green handle upward (1), pushing the
plastic part down (2), and lifting the slot lock (3).
plastic part down (2), and lifting the slot lock (3).
Ê
Carefully pull the expansion card out of the lot (4).
2
/
0
1