Fujitsu RX900 S1 ユーザーズマニュアル
42
Maintenance Manual
RX900
S1
Basic procedures
4.4
Sliding the server out of the rack
V
CAUTION!
●
Use the anti-tilt plate to prevent the rack from tipping when installing
the rack. Pulling the server out of the rack without having installed the
anti-tilt plate may cause the rack to tip over.
the rack. Pulling the server out of the rack without having installed the
anti-tilt plate may cause the rack to tip over.
●
Be careful not to pinch fingers or clothes when sliding out the server
or pushing it back. Failure to do so may cause injury.
or pushing it back. Failure to do so may cause injury.
●
Follow the safety instructions in the
.
Figure 4: Removing the server
Ê
Loosen the knurled screws (see circle).
Trained personnel
1
0