Fujitsu TX200 ユーザーズマニュアル

145

PRIMERGY TX200 S2 User’s Guide

Operatio

ns
after O
S

lation

5.3 Storing the System Configuration

Information

Before starting operations, store the configuration information of the BIOS setup

utility. By storing this information, the system can be recovered with the stored

information in case of a system failure (such as when the information is deleted due

to the drain of the built-in battery). Use Server Management Tools for storing and

recovering the system configuration information.

Since the system configuration information is significant in maintaining the server, be sure to store the

BIOS information after the following operations:

• When the information is changed with the BIOS setup utility

• When the hardware configuration of this server is changed (e.g. CPU, memory, baseboard or

expansion card is added/removed or changed)

As the stored system configuration information will be used during maintenance, etc., send it to your

maintenance personnel.

■ Preparation for Using Server Management Tools

Before using Server Management Tools, prepare the "Server Management Tools" disk supplied with the

server at hand.

■ Cautions

• Server Management Tools are for this server only. Do not use those tools on other systems.

Otherwise, the system may be corrupted.

• Only the information that is configured with the BIOS setup utility can be stored/recovered with

Server Management Tools. The BIOS information in internal SCSI devices or expansion cards

cannot be stored/recovered.

• Make sure to start up the server with the "Server Management Tools" disk before running Server

Management Tools. Do not run Server Management Tools on the server started from the hard disk or

by the other floppy disks. Otherwise, the system may be corrupted.

• Do not eject a floppy disk while the floppy disk access LED is on. Such an action may lead not only

to corruption of the floppy disk data but also an unstable state of the system.

• If an error message appears while running Server Management Tools, respond to the message