Fujitsu TX200 ユーザーズマニュアル

214

Chapter 7  Installing Hardware Options

7.7 Installing 5-inch Internal Options 

This section explains how to install a 5-inch internal device like DAT(72) unit. Unlike 

external devices, internal device does not need to be connected to the outlet 

because its power is supplied from the server. In addition, it offers the advantage of 

space saving. 

 Before adding a 5-inch internal device, install the OS and turn off the server.

7.7.1 Where to Install 5-inch Internal Devices

Install 5-inch internal devices in 5-inch storage bays.

• When installing or removing internal devices, turn off the server, all peripheral

devices, and any other connected devices. Also unplug all power cables from

the outlet.

Failure to do so can cause electric shock.

• Install our genuine internal devices only. 

Failure to do so may cause a device failure, fire, or electric shock. 

• When installing or removing hardware options, make sure to remove the

screws on the specified points only. 

There is a chance of injury if screws other than those on the specified points

are removed. This could also damage the server.

• Touch only the specified part of the printed circuit board. 

Failure to do so could cause injury and also damage the server.

5 inch
storage
bay

[Inside]