Fujitsu C122-E180-01EN ユーザーズマニュアル
CHAPTER 4 REMCS Service Operations
4.2 REMCS Service Menu
4.2 REMCS Service Menu
29
C122-E180-01EN
4.2.6 Connection type change
Use this menu item to change the current connection configuration to another configuration.
1.
From the menu in the window shown in
, click [Connection type
change].
The [Connection type change] window (shown in
) appears.
2.
After changing the connection configuration, click the [Next] button. The current setting information is
discarded and the machine status becomes [Setting not completed].
discarded and the machine status becomes [Setting not completed].
You need to perform the service start procedure by specifying the connection information again
according to
according to
FIGURE 4.6 Window for changing the active connection configuration
4.2.7 Displaying the certificate
Use the following procedure to confirm the information of the certificate.
1. From the menu in the window shown in
, click [Display of certificate].
The window will appear according to following cases:
-
-
Window displayed when the certificate has not been replaced